Visit our Website: www.babush.com

September 2006 Vol. 2 No. 9

Southworth Backsaver Lifts

Back Saver Lifts are extremely rugged and reliable machines. Thousands of Back Saver Lifts are in use throughout the United States for machine feeding, work positioning, assembly, order picking, pallet loading, and a wide range of other applications. They are available in many basic sizes and capacities to lift and position loads up to 6,000 lbs at heights to 48". The wide range of power options, controls, tabletops, and base configurations that can be specified for each of the many basic sizes gives the user an almost unlimited choice of variations.

  • Contoured Legs
  • Lubricated-for-Life Bearings
  • Heavy-Duty Hoses
  • Oversize, Low-Pressure Hydraulic Cylinders
  • Built In Safety Chock
  • Comfort Edge Design
  • Heavy-Duty Torque Tubes
  • Tell-Tale Return Hydraulic Fluid Line
  • Adjustable Flow Control
  • Wear Indicating Rollers
  • Roll Retainers

Product Spotlight

  • Rotates Products up to 360
  • Standard Speed: 30 FPM
  • 3 RPM
  • Proximity Switches sense position and control product rotation
  • Variable speed control

The 26 CRPT is used to rotate products up to 360 degrees. The turntable is powered by a shaft mounted gearmotor complete with variable speed controller for soft start/stop and has proximity switches mounted on base to sense position and control rotation of product. Turntable speed is 3 Revolutions per minute with a 1 HP 460/3/60 gearmotor. An 8-wire collector ring allows unlimited roation of turntable. Powered transition rollers, mounted on apron of turntable deck, help move product onto and off of turntable. The 26 CRR section has a Top Side Mounted Drive contained within the turning radius of the turntable.Standard speed is 30 GPM with 1/2 HP 460/3/60 gearmotor. The tread rollers are 2-5/8 in. diameter with 7 gauge wall on 4 inch roller centers and have 2-5/8 in. dia. x .219 wall drive rollers with heavy duty bearings. Also available; gravity transition rollers; external transition roller sections (mounted to mating conveyors in fill in gap created by radius of turntable). Minimum Elevation - 16 inches.

Email or Call Us today to find a solution that's right for you!
babushsales@babush.com or 262-650-7700


Babush Material Handling W222 N5739 Miller Way
Sussex, WI 53089
262-650-7700 phone
262-574-5441 fax
Babush Material Handling Systems, Inc. respects the web and the privacy of those who use it.
If you wish to be removed from future mailings, please use the unsubscribe link at the bottom of this mailing.

Copyright © 2004 - 2006 Babush Material Handling Systems, Inc. All Rights Reserved.